Questions & Answers - Questions récentes tagguées rf

Winter setting with EVO One

Sat, 14 Dec 2024 15:50:30 +0000

Hello Fortin,

I have Mazda CX-5 2021 Kuro Edition. I purchased it recently. It came with EVO One preinstalled by previous owner. I dont know is there any specific winter setting because I setup weather condition like turn heating on for driver seat and steering heating. then turn off the vehicle but when I remote start the vehicle it just fan thats turn on heated seat and steering get turned off. my goal is here it retain the setting when i turn off the car.

RFK442 evo one only able to connect 1 of the 2 remotes

Sat, 10 Feb 2024 19:28:12 +0000

I have been able to setup one RFk442 remote but when I try to program the 2nd one it does not work and get red flashing lights. Anything special to get both programmed?

Evo All w/ Evo Start no RF kit programming

Tue, 12 Dec 2023 12:48:15 +0000

2018 Ford Edge, Standalone Evo All install, and adding Evo Start. Can not get the Evo Start to program or "mate" to the Evo all. I do have temp, GPS, and bluetooth telemetry to cell via Evo Start but can not get any functions to work via cell app. Programming, I have tried hold program button, plug in black data, release on RED AND BLUE, push till RED AND BLUE, release while constant RED AND BLUE, ignition ON...but do not get the quick flash of RED AND BLUE w/ YELLOW ignition led on. Can you please guide me to what my issue is PLEASE? Remote start via factory lock unlock lock works along with door lock/ unlock like it should. Located in the eastern states. THANK YOU IN ADVANCE ! ABSOLUTELY LOVE THE FORTIN BRAND AND PRODUCTS.

evo one with FORTIN EVO-ONE-912

Wed, 19 Apr 2023 06:27:06 +0000

FORTIN EVO-ONE-912 with no blinking LED after follwing all inestruction igntion on off on 4x brake padel the blue led wont come on or flash.the red led under the loop in the evo one flashes but the ANT900 not responding at all.

- when i plug the wire in the ant 900 led will blink ones and thats it and when i try to update the RFkit by flash link updater it wont dedect it . i am suspecting ANT900 anttina defected.Any help ? thanks

I bought an evo one, it worked perfectly with the original wear

Wed, 09 Nov 2022 17:25:48 +0000

Hello, I installed my evo one and it worked perfectly, but I know a lot of distance I didn't turn on so I bought the RFK441 kit. I installed it now. My car doesn't turn on either with the control of the kit or with my original key. I disconnected it and set it up again with only the key but it doesn't do anything to

2019 Nissan Versa Note RF Kit Programming Option for flashlink manager

Sun, 18 Sep 2022 20:47:18 +0000

Hi there,

I am trying to get my RFK912 remotes to work on my nissan versa note but i don't know what option to choose in the Flashlink mannger. Everytime i go to look at the options flashlink manager advices me that wizard mode isnt avibaile for my vechile of choice and and tells me to go to the pro mode. In the pro mode i don't see an option to choose the kinda of anttenta that i have.

2021 evo one unit and flashlink 4?

Thu, 23 Jun 2022 18:39:47 +0000

I have a 2021 evo one unit that i want to use on a 2019 mazda cx-9 grand touring reserve. The unit has a QR code and not a barcode. Can the flashlink 4 still program it? It a evo one 912 kit that was previously used in a different car. Side question, how can i reset this to factory before installing it on my car or do i even need to?

2018 Audi Q5 proximity key unlock, engine auto stop-start, and folding mirrors on lock not working

Tue, 22 Feb 2022 00:46:19 +0000

I have recently intalled EVO-ALL AUD2 / AUDT2 and things work just fine. However, it seems like proximity or smart keyless entry / unlock does not work when remote started. I have to press unlock button to get in the car. Also, my mirrors do not fold when shut down remotely by RF remote. Only if I use the OEM fob to lock the car will the side mirrors fold.

Is this a programming issue or something mechanical? Any fixes? Thanks!

EDIT: Also, another thing I noticed is the "auto engine on/off" or "auto stop-start" (e.g., at traffic lights or when idling) does not work when remotely started. Is that common after installing fortin?

2018 Ford Focus Evo One Functions to allow a rf remote to work with lock and unlock functions

Mon, 08 Nov 2021 14:20:45 +0000

I was able to get the lock and unlock wires figured out but i don't know what setting i need to turn on to allow me to be able to use the lock and unlock on the Rf remote

rf kit program setting, door unlocking

Wed, 20 Oct 2021 21:38:49 +0000

what setting do i need to enable to install RF442 on 2014 nissan versa with standard key.im using t harness thar one nis5. how do i program the rf kit and do i need to connect pin a1 to pin a8 if i dont want to use rf kit to unlock or lock just need remote start.

Evo-all and compustar rf remotes

Sun, 19 Sep 2021 14:08:25 +0000

Hi i bought a evo-all and a compustar 4900s and after trying to install the compustar system to the evo-all and had no luck, I decided to to see if I could just use the remote and antenna with the evo-all rather then the compustar remote start. And if its possible to just add the antenna and remotes to the evo. How would one go about doing that?

2018 Ford Focus Evo all Lock wiring

Wed, 23 Jun 2021 23:43:45 +0000

I'm looking at the wiring diagram to be able to use the lock and unlock funtion for my evo but im a bit lost after i cut the wires do i run the wires back to the evo or do I add a relay switch at the wires i cut?

RFK 411 Not flashing blue rapidly when trying to program new keys

Mon, 21 Jun 2021 22:18:15 +0000

I bought Fortins Rf Kit (rfk 411) after being able to program the fobs to the antina i was able to start my vehicle but only start it i wasn't able to unlock the car or lock the car with the fobs having this issue i decided to factory reset my evo and start from scratch and being able to reprogram the keys in order to reslove this issue. I have factory reseted my evo three times in order to get to where i need to program the keys.

My current issue that im having now is when i go to program the keys. I plug in the antina and everything to the evo. The antina flashes blue once but when i go to put the evo in progamming mode and put the key in the igntion the antina should be flashing rappidly but its not. The antina only flashes when the vehicle is armed

Being able to add an rf kit and Parking Light t Harness

Sun, 20 Jun 2021 20:01:32 +0000

Im looking at adding a parking light t harness for my 2018 Ford Focus I found a parking t harness but the end of the Blue connetor that that plugs into the Evo- one is being currently occupied by my rf kit. Im wanting to add my rf kit and my Parking light t harness could i get a spliter that would be male to the Evo and split to two female ends allowing me to plug in the rf kit and the parking light harness. Finally in the end would i just need to get the evo all?

2018 Ford Focus Fortin RF Kit RFK411 Install possibly reflashing to allow rf kit to work?

Thu, 17 Jun 2021 21:05:19 +0000

Some time back I bought a evo- one installed it correctly got everything programmed and was just using the factory oem keys to start my car. A couple of months have went by since i installed the remote start system now I'm looking at exstending the capability that I can start my car. Mainly to blame that I got tired of having to walk close enough to my car to start.

I want to make sure I get the programming instructions for the fobs (RFK411) correctly I keep seeing diffrent people do it different ways. The way things were shown in a youtube video you hold the button on the fortin modeul while pressing you plug in the power cable for the modeul once plugged in you keep holding until you get a blue and red light once blue and red you let go. After letting go you press the button again and hold unitl the lights start flashing. After the lights are flashing you instert your factory oem key and turn it the run postion once in the run postion you press and hold the button on the RFK411 remote for 12 seconds or just until it the evo one flashes telling you it has been programmed.

My big question is will i need to reflash my evo to allow my rf kit to work? I bought my kit from a guy who preprograms them before being shipping and im not quite sure if he has that setting turned on for my Evo one. Incase if that will i need to reflash and reprogram my evo and by doing so will i need to decript it after factory resetting it? and then going through all the steps of programming it

XL202 option not showing in unit options for evo-one in flashlink

Sat, 01 May 2021 23:50:59 +0000

I am looking to get a viper remote/antenna, with an XL202, but before doing that i went to make sure I could configure my evo-one properly. Problem is, it appears that I can't.

here is what i see when i open the unit options. There should be an XL202 option next to fortin 2

https://emu.bz/4KM.png

here is module info: https://emu.bz/IBM.png (btw could a staff member reset the flash limit on the remote starter, i tried different firmware versions to see if the option would unlock)

firmware update version https://emu.bz/tKA.png

flashlink version 4.51

2019 kia forte standard key

Is RFK912 available for FlashLogic FLRSCH4?

Tue, 16 Feb 2021 02:16:56 +0000

I want to install RFK912 on Chrysler vehicles. Can it be used with the installed FlashLogic FLRSCH4?

EVO-ONE - install myCar in existing install with RFkit

Thu, 21 Jan 2021 11:25:09 +0000

Have existing EVO-ONE with RFK422. Want to install MyCar.

What needs to be selected under flahslink manager ? Currently "RF Kit compitible" has Fortin 2 selected.

Flashlink manager EVO-ONE - missing RFKit programming option

Thu, 21 Jan 2021 11:22:09 +0000

When connected EVOONE to flashlink manager; Do not see "RF kit compitible" menu under "REMOTE STARTER" tab.

Any reason its not visible?

RFK441 won’t start truck

Tue, 19 Jan 2021 22:23:39 +0000

I didn't install the "kill switch" I think that's why it won't start. I get the 5 red blinks. How do I install the kill switch

2007 Silverado EVO ALL

keep failing programming RF641W on EVO ONE

Mon, 18 Jan 2021 21:21:12 +0000

I completeted module programing and tried to program RF641W but kept failing. When entering the mode there is no horn chirping even pressing the button 5 times. Also the antenna led stays off after pressing brake pedal. Kept trying and all of a sudden the LED for RF programing turned red solid. Even when connecting flashlink, it failed to connect with the RF programing led stays on while there was no issue conneting it a couple hours ago. Any advice would be appreciated.

RF-Kit install on FOR2 T-Harness

Tue, 08 Dec 2020 08:27:56 +0000

Is it possible to install a RF-Kit on a 2018 F150 with a EVO-ALL standalone and THAR-FOR2? If yes how can I do it? I saw some guides that show how to wire pwr and gnd but non for the 2 remaining wire. Thanks

1 of 2 RFK 912 Remote Will Not Pair to Evo-One

Sat, 05 Dec 2020 13:01:31 +0000

The vehicle is a 2017 Mazda CX-9 with EVO One previously installed. I added the RFK912 two way remotes and antenna, but only one remote programs successfully to the antenna. The second remote lights go solid blue-flashing blue five times-solid red briefly with a beep while holding the button. I have confirmed that the antenna LED is flashing blue in learn mode.

After programming attempts, the vehicle does not respond to the second remote but the first one works fine. The factory remotes start the vehicle with Lock-Lock-Lock, too.

I have already ensured that the EVO-One and antenna are flashed to the latest firmware.

EVO-ALL + FT-D100+Compustar RF kit

Tue, 29 Sep 2020 10:40:55 +0000

I installed a few different car using EVO-ALL + FT-D100 + compustar RF kit which is working good until car battery is dead or replace. Factory 3x still working but compustar remote is not woking anymore. I need to reprogram compustar remote then working again. All FT-D100 is update firmware before I installed. That problem is not only one car, it seen all car same issue. Any idea? Thanks.

how do I program RF642W fobs to work on Evo-one?

Sat, 01 Aug 2020 13:05:25 +0000

i have installed an Evo-one on my 2019 mazda cx5 and the OEM key fob 3x lock start is working fine. I have also included the RF642W when i programmed / flashed the module. I am not sure what to do next to make the rf kit functioning. i am a bit confused with the quick guide. I dont get the same response from the system (as stated on the guide) when trying to do the steps on programming the fobs. not sure what I am missing.

no option h2 on 2011 kia sportage evo one

Wed, 22 Jan 2020 17:07:44 +0000

programming evo-one for 2011 kia sportage,push start ,trying to add fortin rf kit fmh series,asks to select option h2 on program by-pass option,but its not there in the programming prompts for the evo -one? I have an evo all here and it will show the h2 option,but will i need a remote starter kit as well as the rf kit and evo all ? or will it stand alone(evo-all + rf kit?)

manual remote start without original fob nor RF kit

Thu, 07 Nov 2019 14:32:00 +0000

evo-all,

assuming i do not want to use original fob for 3 lock to start it but use wireless relay i have as a trigger to the evo to start the car, which wire of evo-all can i pull down (GND) or pull up (12 Vdc) to start it? should it be momentry (how many milliseconds) or fix as long as it is running ?

thanks for info.

Connecting RM411 RF Kit to EVO-ALL

Sun, 06 Oct 2019 15:20:24 +0000

About a year ago I installed the EVO-FORT1 with the EVO-ALL and was using the 3x Lock on OEM remote and that works just fine and still does. I recently bought the RM411 rf kit with the ANT-FMH-SW antenna and have been trying to get the remotes to start my 2011 Ford Escape. I used the flash link and manager to update the EVO-ALL for the correct settings to allow the RF kit to work with it. When I go to try and program the transmitter, following this guide https://cdn02.fortin.ca/download/69291/rm411-install-guide-69291.pdf, it doesn't seem to work. At step 5 all three LEDs are on as expected but when I hold down the transmitter button for 12 seconds and release it the yellow light never blinks so the remote transmitter never programs correctly.

What I am struggling with is that at step 5 all three LEDs on the EVO-ALL are on and the LED on the antenna is flashing. So this would mean the the EVO-ALL is in programming mode and has communicated to the antenna correctly so it is looking to program the remotes. So I have the data-link connection made and the antenna has power. When I hold the transmitter button for 12 seconds and release it the LED on the antenna momentarilly stops flashing indicating that it is communicating with the remote just fine. So for some reason the antena seems to not be communicating back to the EVO-ALL, or the EVO-ALL isn't picking up the right information from the antenna. Any ideas how to work around this? Thanks.

For information, I have the H2 option turned on (Fortin2 for the RF Kit) and the 3x lock on the OEM remote still works so I know the EVO-ALL is communicating with the car.

Can I use LINKR LT2 with EVO-NIST4

Mon, 09 Sep 2019 12:12:14 +0000

I ordred an EVO-NIST4 with flash link. It says it is compatible with most telematic & GPS modules including Smart Phone and compatiable with Long Range Kits. Will the LINKR LT2 work with this particular unit?

2012 Ford Fusion using EVO RS - Fort 1 - Which RF Kits works with this unit.

Thu, 01 Aug 2019 12:58:18 +0000

Has anyone hooked and RF kit up to the EVO RS. Have a Ford Fusion 2012. Hoping to use a single button RF kit to reduce size of fob.

IS AN RF KIT NEEDED WHEN INSTALLING INTO 2016 HUNDAI ACCENT STANDARD KEY W/ T HARNESS

Wed, 08 May 2019 13:29:01 +0000

I have a 2016 Hyundai Accent standard key Evo One with a t harness is a rf kit needed for installation

EVO-START2 and EVO -ALL

Wed, 30 Jan 2019 21:01:58 +0000

Now that I have my EVO ALL with THARNESS working on to the next step adding a EVO_START2 with a RFA2A adapter. The install diagrams are really not good, the antenna cable has 2 ends and a ING+ yellow wire. The RFA2A has 3 connectors and red black for power that is not needed???So which connector goes to what? The diagram really suck SORRY FORTIN. I think you have female and male connector mislabled a male has pins exposed and female no pins just sockets. Does anyone have pictures on the few connections I have to make

how to Add RF kit to EVO-All are already activated or need to re-flash and

Thu, 24 Jan 2019 15:33:40 +0000

I have EVO-ALL working in my Dodge caravan 2016. Now i bought Fortin RF kit RF-641W do i need to reflash my module to add RF kit or its already activated?

Where is RF Option

Sat, 15 Dec 2018 09:58:01 +0000

There is no option to enable RF kits in the flash updater tool. I am trying to add a MYCAR, Autolink module.

The antenna doesnt seem to be recognized

Thu, 22 Nov 2018 13:41:23 +0000

I cant seem to link the RF Antenna to the Evo One. Is there something I'm missing? Is there a specific firmware update I need? 2008 Toyota FJ Cruiser.

Evo One can't Program Compustar G9 2 way

Tue, 17 Jan 2017 10:17:21 +0000

I have an EVO ONE which i installed in my 2016 Tucson with the T harness. The wiring was minimal and straight forward, so I know it's all correct. It's just 4 CANbus wires, parking lights, horn, and ignition. The dealer I bought it from programmed it for a Revo 1.1(fortin2) but I couldn't get that to work. I followed the procedure for the valet button and brake pedal, the car responds and flashes the lights when it's supposed to, but wouldn't respond when pressing the start button on the Revo. So I sent those remotes back to the dealer to be replaced.

While waiting for the replacement remotes, I was at best buy and spotted the compustar 2 way system (RF-2WG9-SP). I bought it and ordered the flashlink2 unit online. First, before the flashlink arrived, I swapped the 4 pin wires and programmed the remotes with the EVO ONE still set to fortin2 and firmware 1.21, and the compustar remotes WORKED. I could Lock/Unlock my doors and hatch, as well as start the car. The car responds exactly as it should with the lights and horn. The problem is it only works as a one way remote. The blue compustart remote is supposed to be one way, but the orange remote is supposed to give me a 2 way response. However, at least I know all of my wiring is correct. So the problem is communications handshaking between the box and the remotes.

So my Flashlink comes in and i'm able to switch the options to firsttech from fortin2. I tried to program the remotes on mode 1 and mode 5, but no success. I tried to do a full master reset and flashed the firmware to 0.96. I set it to firsttech in options and tried to program on mode 1 but didn't work. So i did a master reset, set options to firsttech and tried to program on mode 5 but no success. So I set it back to fortin2 and it programmed on mode 5 on the first try. Everything works again except only as a 1 way remote.

Any ideas, I figured it would be straight forward to program this remote?

2 way lcd remote

Sat, 03 Sep 2016 12:41:17 +0000

Does anyone know of any 2 way remotes that have a lcd display that works with the evo-all? I looked at that compatible rf kit page but it doesn't have pics. Thanks