Questions & Answers - Questions récentes tagguées sensor

Can you connect a 4 pin Shock/tilt sensor to the evo-one?

Sun, 06 Apr 2025 02:27:48 +0000

First tech Shock/tilt sensor is a 4 pin but the Evo-one is 3 pin, Is there any other way or is there a 4 pin to 3 pin adapter? Im fine with just power, ground, trigger, I don't need the warning persay

Shock sensor

Sat, 10 Aug 2024 23:35:41 +0000

Can I add shock sensor Evo one on 2022 Toyota Corolla with oem alarm ?

Thank you.

Shock sensor not firing the evo all alarm.

Sun, 06 Feb 2022 12:27:35 +0000

Evo all serial number 001A07339278 Have dei shock sensor with battery to red gnd to blk and the blue trigger to the purple white on the evo all. Added siren and relay and turned on alarm features and siren and alarm are working just no set off from shock sensor

how to connect shock sensor to evo all with gm7 harness on 2014 malibu with flip key?

Tue, 09 Feb 2021 18:49:03 +0000

I connected wire from to shock sensor to purple/white, but it will not trigger alarm.

CAN I USE A DUAL STAGE PROXIMITY SENSOR AND A SHOCK SENSOR WITH THE EVO-ONE?

Sun, 08 Nov 2020 10:21:46 +0000

2008 Chevrolet Impala LS

shock sensor activation

Tue, 09 Jun 2020 18:03:18 +0000

Having Buick Regal without factory alarm with EVO-ALL Standalone installation With GMT6 Harness And RFK-912 External Remotre starter powered by RFA2A Cable

i got fortin dual stage shock sensor and wanted to connect it to evo-all

the cable came with the sensor has no where to be connected to RFA2A Or GMT6 harness

the only was is to connect it to RFA2A black connection directly to shock sensor itself, shock sensor gives red light but not triggering alarm on shocks

how to install it correctly to trigger alarm horn, and if possible without cutting and connecting wires??

Powering my shock sensor off evo all

Thu, 23 Apr 2020 23:39:01 +0000

I am going to be using an evo all as an alarm, since my vehicle has Oem remote start. I purchased a shock sensor and siren, and was wondering if I could power the shock sensor off of the red and black wires going into the evo all from the t-harness? I am not sure what the rated capacity is, and don't want to damage anything.

Max current rating of +12V pin in shock sensor port on EVO-ONE.

Thu, 09 Apr 2020 02:38:05 +0000

What is the maxiumum current (mA) I can draw from the +12V line in the shock sensor port of an EVO-ONE?

Thanks,

Jeff

Are you able to add a shock sensor to a evo-all in standalone for a 2015 F-250?

Mon, 11 Nov 2019 08:29:56 +0000

Seeing if a evo-all could also be used as an alarm on a 2015 F-250. The vehicle does not have a oem alarm.

Connection of 4 sensor triggers to Evo One Jeep Wrangler manual transmission?

Wed, 06 Nov 2019 23:28:01 +0000

How many ports are available to conect more than one trigger sensor? The installation sheet doesn't have the different pigtail ports name or function. H, I,?

Can the Evo One control all 4 sensors: shock, tilt, glass broken, motion. How can the hood switch can be used to trigger the alarm since the regular jeep does not have security while armed to protect battery or any bluetooth relay accessory in the engine compartment.

I just ordered the Evo One and the seller wired everything including the linker so the wiring was prep prior to delivery of the components.

I am trying to add all these sensors to the unit.

Thanks for helping

Natalie

I want to turn on alarm and add shock sensor and siren

Mon, 23 Sep 2019 18:22:38 +0000

I would like to add a shock sensor and siren to my Evo All. What do I need to make this happen? I know I have to go in and turn on the settings and I have the flash link.

shock sensor power

Sun, 22 Sep 2019 13:44:22 +0000

Evo-one, currently utilizing dark blue wire A8 with option 32.4 to detect armed system status, but would better use it for another purpose..

what about 12V power at black 3 pin shock sensor connector F? Is it always ON?

there's no way to play around and make it energised when it's armed only?

add on shcok sensor to EVO ALL?

Thu, 19 Sep 2019 11:39:01 +0000

Can I add a shock sensor and siren to EVO ALL and if so what is recommened?

no power to the camshaft sensor two wire prong

Tue, 23 Jul 2019 01:52:55 +0000

1988 honda civc

Evo one alarm shock sensor warn away only

Wed, 05 Jun 2019 01:20:23 +0000

Evo one alarm. Shock sensor only triggers warn away. When tested without sensor plugged in short pulse triggers warn away. Long pause does the same. Cannot get full alarm to trigger at all. 002807 242359

DUAL STAGE SHOCK SENSOR CONNECTION TO EVO-ONE

Mon, 25 Feb 2019 10:21:14 +0000

Hi,

I want to add dual stage shock sensor to my evo-one. Is that plug and play application. Is this complete security system which can be added to evo-one.

Please let me know.

Evo-One shock sensor zone #4

Wed, 10 May 2017 11:58:19 +0000

Bonjour installation du Evo-start est O.K., tous fonctionne sauf un item q'avant l'installation du Evo-start fonctionnais, j'ai perdu mon shock sensor, j'ai tester la pin médian comme il démontre sur le vidéo You-Tube en la groundant à la masse lorsque cela fessait 2 minutes le module Ove-One étais Armé et toujours rien, ensuite j'ai tester le module shock sensor et il envoi bien le signal sur mon multimètre numérique, donc ma question c'est pourriez-vous me dire ce que l'on fais pour activé la zone #4 (Shock Sensor) sur l'Evo-one, je c'est qu'il n'est pas défectueux il fonctionne très bien, il doit me manqué une petite programmation... merci!

Evo-All "ground-when-armed" wire for Tilt sensor

Sun, 12 Mar 2017 11:37:43 +0000

Installed Evo-All and configured as Remote Start and Alarm. Added Shock sensor on Purple/White (A3-Dual Stage Trigger) wire and a Glass Sensor on the Purple ( A2-External Trigger).

I am considering a tilt sensor and found DEI 507M.

1-how do I connect it to Evo-All? I suspect I will use the same wire I used for the [A2/Purple = External Trigger (-) ... but wanted to make sure I just tap into the same wire

2- The DEI 507M requires a "ground-when-armed" wire ( https://www.falcon.ro/files/home/01.Securitate_si_confort_auto/03.Module_optionale_securitate/Directed507M/Directed507M_manual_EN.pdf ) wondering what wire would that be on EvoAll?

Having a diagram showing the purpose for each wire on Evo-All , comes handy sometimes ( like now :) ) Can you point me to such diagram?

Thanks!

Dual Stage Shock sensor "pre-warn" stage triggering full alarm

Mon, 23 Jan 2017 12:53:49 +0000

Good morning,

I have installed an omega AU85TN Dual Stage Shock/Glass break sensor on my evo-one. I combined both the pre-warn wire and the second stage full alarm wire together to the middle pin in the shock sensor port. I am getting a full alarm when either pre-warn is triggered or the full alarm stage is triggered. Not that big of deal considering the sensor is doing its job, but my OCD wont let me settle. Is there anything I can do (add a resistor, etc) to the pre warn wire to have it function appropriately?

Shock sensor not setting off evo one alarm.

Sun, 22 Jan 2017 00:00:40 +0000

2013 Hyundai Elantra shock sensor not setting off evo one alarm. It blinks when the car is hit, does this mean the alarm is not set up?

What is the specific name of the plastic 3 pin shock sensor connector on an evo-one

Fri, 20 Jan 2017 15:21:41 +0000

I have been to several electronic stores, auto parts stores, and searched the internet. It would help tremendously if I had the specific name of the type of connector used for the 3 pin shock sensor port on the evo-one. I would prefer to have the plastic connector instead of hard wiring it or using butt connectors on the pins. Its hard enough to find a butt connector btw. I have my sensors and the wiring ready to go all i need is the specific name of the plastic connector. Thanks in advance

How do I wire a tilt sensor trigger wire to the Evo-One into zone 8?

Thu, 19 Jan 2017 15:23:29 +0000

I would like to wire my tilt sensor into zone 8 on the evo-one. Where do i need to attach the sensor's trigger wire to accomplish this?

Fortin Shock sensor not working with evo-one installed in 2013 Hyundai Elantra

Thu, 29 Dec 2016 21:12:13 +0000

I had my evo one and Fortin shock sensor installed by a professional installer, however they have not been able to get the shock sensor to work (no warn away or basic function) I need help as they have left it at that unless I can figure it out.

3 pin shock sensor connector

Mon, 26 Dec 2016 14:23:25 +0000

What is the name of the type of connector used for the shock sensor port and where can I purchase a connector with a wiring harness?

If I wanted to add a tilt sensor and wired the trigger into the pink/black wire (A15) would it give me a proper tilt alarm response if triggered on a two way remote or parking light flash upon disarm? I know I need to tie the trigger for the tilt alarm into zone 8 for that I just dont know where to do that.

Are the ground and 12v leads coming from the shock sensor port only active when the alarm is armed or are the always active?

Evo-Onel 07 MDX shock sensor install

Wed, 13 Jul 2016 17:32:37 +0000

I try connecting the shock sensor to the 3 port connection of the Evo-One, but when testing the port it has no positive output, and from what I can tell no ground. How could I hook up my dual stage shock sensor to this great all in one unit. I have my smart start hooked up and running as well as my parking lights working (-), thanks to Jesus' quick detailed replies. Is there a setting I missed or perhaps a pair of wires I could connect the signal wires to and ground the negative and get power from another wire when armed, similiar to the evo-all.