Questions & Answers - Questions récentes tagguées smartstart-dsm200

2011 Genesis Coupe, No 3x Lock to Start Evo-All

Mon, 09 Dec 2019 18:46:22 +0000

I have an Evo-All installed with a Viper Smart Start module and im having issues getting the OEM 3x Lock to start to function. The evo will remote start via the smart start app and the unlock/lock seems to function fine there, but no matter what i do i can't get the 3x lock to start working. The blue led only lights up on the fortin when the unlock is pressed but never for the lock. Any ideas what could be causing this?

Evo one & DEI smartstart cable

Thu, 31 Dec 2015 02:38:58 +0000

I got a viper smart start vsm200. From what I have been reading, I do not use the cable came with vsm200 unit. Is that right? So what cable do I support to use? I'm already used all the cable that come with the ax-one. Am I missing something?

EVO-ONE not communicating to SmartStart DSM200 - installed on 2014 Tacoma

Wed, 18 Mar 2015 19:00:49 +0000

I just left a voicemail for assistance.

I've installed the EVO-ONE using the Fortin THAR-ONE-TOY2 harness and instructions in guide 19621 in my 2014 Toyota Tacoma V6 Automatic. One question I had in that guide is that it appears as though Wire D4 is not supposed to be connected to anything by the scissor cut marks. Is this correct?

I got the EVO-ONE installed and got it to program for my key bypass, but since I'm planning on using a SmartStart DMS200, I don't have a way to test the installation of the EVO-ONE to make sure it starts my truck. It seems the factory remotes aren't supported on Tacoma, so I can't use Lock Lock Lock to start it.

So I have the EVO-ONE connected to a brand new DSM200 module using an EVO-ALL data cable, and the DSM200 initializes to cellular system and lights solid Amber, but the green light which is supposed to come on solid to indicate communication established with the remote start never comes on.

What am I doing wrong?

evo all smartstart not workung

Wed, 14 Jan 2015 23:14:20 +0000

Setup for d2d, tried different possibilitys.

The DSM200 amber led solid, green led solid.

Was working with keyfob.

Firmware 70.16

start the car using both 3X Lock Remote Starter and Smartstart

Fri, 02 Jan 2015 18:18:55 +0000

Hi,

I would like to be able to start the car either with the manufacture OEM remote via 3X Lock Remote Starter or using the Smartstart app

Evo One bypass settings for DEI DSM250?

Fri, 05 Dec 2014 17:11:37 +0000

Hi -

An Evo One is installed on a 2014 Tundra, and being used for remote start (3x lock), works great, awesome product! A DEI DSM250 is being installed as an extenstion onto the Evo One, and we would like to confirm the proper settings via the flash loader.

This is what we believe needs to be set on the Evo One...

Flash Loader - Bi-Pass Settings (?):

#20 - GPS / I/O (the DSM250 is GPS enabled where as the DSM200 is only "RemoteStart")

#21 - D2D

#23 Supported RF Kits Available - select #4 (DEI Smart Start)

Flash Loader - Remote Start Settings (?):

It doesn't appear I need to change any of the functions 1-39?

Thanks in advance

Promblems with SmartStart with EVO-ALL in stand alone mode

Sun, 30 Nov 2014 17:04:19 +0000

Nissan GTR 2014, EVO-ALL in standalone mode and SmartStart DSM200.

The Start, Stop, Lock and Unlock all worked via the SmartStart App. However;

When Locking the car most of the time the app would receive a confirmation, back but it could take a while
On Unlock, although the car unlocks the message would say "Doors are still locked. Check overall status in the status tab"
On starting the engine there is/was a very long delay and I would say only in 50% of the cases did I receive an Engine running confirmation
The Status screen never works and we get a message that said "The response from the server could not be interpreted. If the problem persists, go to mysmartstart.com for help (31)"

Tried two different EVO-ALLs and get exactly ther same result.

The SmartStart unit was previously installed with DB-ALL2 and was working fine. After trying the EVO-ALL(s) and experiencing the problems above we put the DBALL2 back in and everything works (same car same location).

Very strange..