Questions & Answers - Questions récentes tagguées start

App wont start car

Fri, 09 Jan 2026 16:55:25 +0000

My evostart2 has worked very well for the most part for 5 years now. Recently it won't start with the app. I've reset my phone as well as the antena but won't connect to network. No lights on the antena when using app to attempt starts. 21 toyota tundra

Evo start 2

Tue, 30 Dec 2025 13:50:01 +0000

Bonjour

Depuis plusieurs semaines, je n'ai plus aucune réponse (que vraiment très rarement c'est ok) de mon evo start 2. L'auto reçois bien les commandes mais l'application ne recois pas les informations de retour que ce sois pour la réponse de retour de commande ou pour actualiser l'état. Ma conjointe elle n'a aucun problème. Désinstaller l'application et la réinstaller ne change rien. Je viens de changer ma batterie de l'auto car je la savais faible mais toujours rien. Il y a t'il un moyen de reset l'antenne evo start 2 ou le compte qui est peu être en problème?

Merci

Volkswagen Golf 2017 Push-to-Start -Digital Dash

Wed, 12 Nov 2025 18:29:19 +0000

I have the EVO-VWT1 system installed in my VW Golf no key sacrifice. I am wanting to upgrade the dash from analog to digital. What changes if any do I need to make to my current system to keep the same functionality

Comfort Seat Adjustment & Parking Break Error

Fri, 07 Nov 2025 19:55:27 +0000

Evo One & MyCar installed and working properly. Looking to confirm a couple of entry items after remote start.

1. On entry, pressing the start button once sometimes will have the following error message displayed, "Parking Support Brake Malfunction - Visit your dealer". This doesn't seem to show up when starting the truck normally. Can there be connection between the remote start and this error or is it just coincidence?

2. My seat goes back automatically when exiting the vehicle and then returns to my position when I normally enter and start the truck. When remote start is activated, the seat doesn't return to my position regardless if I hit the start button a few times. It will reset if I turn off the truck and re-start naturally. Is this feature supported or did I miss something on the programming? Should I just disable this feature?

Thanks

Thought I would update my own post in case anyone else has a similar question. Never did get this to work automatically but when entering the the truck, I hit the push start once and then the brake. The screen cycles off and on like it's being started. I then push the seat memory button to move it into my position.

If I do not push the brake pedal, things like the seat memory, wipers (it think) and probably other things do not work yet. Kind of like the vehicle is not in an ignition state until I hit the brake pedal.

Hope this helps.

Secondary harness wiring to kick panel door lock wiring problem

Wed, 29 Oct 2025 23:48:29 +0000

I need help! I have the Evo one connected and it starts the car wonderful but I'm trying to track down the connection at the Driver's side kick panel to Lock and unlock the door. In the video You have on YouTube you're saying to look for a blue and gray wire but what I tracked down that locks and unlocks the door. Is the white connector that is pictured here and all it has is a blue wire a yellow wire and 2 purple wires with Grey traces. So I'm not sure what to hook my purple and purple with white trace wire up to coming from The secondary wiring harness provided with the Evo one. Let me know please? thanks I need help! I don't want to connect to the wrong wires and blow a fuse or burn something up inside the Evo one box. I need help to identify the right wires to connect to thanks

This is for a 2008 nissan pathfinder se

2021 Audi remote start

Wed, 22 Oct 2025 00:37:56 +0000

Hello. I have a 2021 Audi A5. If I use EVOAUDT2 evo all and the flash link can I create a virtual key using Dcryptor so I don’t have to use a physical key fob? Thank you

purchased EVO-CHRT4 for 2011 jeep grand cherokee

Fri, 10 Oct 2025 18:59:38 +0000

I purchased the EVO-CHRT4 for a 2011 jeep grand cherokee. Installed per instructions, also tried a youtube install. All steps went as required, per instructions. jeep will not start remotely. please help.

Alexa support in the future?

Thu, 25 Jul 2024 07:41:12 +0000

With automation ever so popular these days, have there been talks of Fortin products being Alexa capable?

Thank you very much.

Fortin Evo Start - No fuel reading - 2012 Sonata

Fri, 24 May 2024 19:42:14 +0000

Installed Fortin EVO ALL + Fortin EVO Start. Everything works except for fuel gauge reading on app.

I am able use all available app functions for remote start, door close, lock/unlock, GPS, internal temperature. On the App I am unable to get fuel level to be displayed. (see attached screenshot)

https://photos.app.goo.gl/pi3MAUQ8rGQbjYpM6

Remote auto engine start for Toyota Land Cruiser 200 2011 years

Sat, 16 Mar 2024 11:52:48 +0000

I would like to know if Fortin EVO-ALL is suitable for remote engine starting (By pressing the car lock button 3 times) for a Toyota Land Cruiser 200 2011y ignition system push to talk

Evo All w/ Evo Start no RF kit programming

Tue, 12 Dec 2023 12:48:15 +0000

2018 Ford Edge, Standalone Evo All install, and adding Evo Start. Can not get the Evo Start to program or "mate" to the Evo all. I do have temp, GPS, and bluetooth telemetry to cell via Evo Start but can not get any functions to work via cell app. Programming, I have tried hold program button, plug in black data, release on RED AND BLUE, push till RED AND BLUE, release while constant RED AND BLUE, ignition ON...but do not get the quick flash of RED AND BLUE w/ YELLOW ignition led on. Can you please guide me to what my issue is PLEASE? Remote start via factory lock unlock lock works along with door lock/ unlock like it should. Located in the eastern states. THANK YOU IN ADVANCE ! ABSOLUTELY LOVE THE FORTIN BRAND AND PRODUCTS.

2014 Audi Q7 Starting Sequence using

Tue, 21 Nov 2023 11:43:52 +0000

HI there,

I've recently purchased a 2014 Audi Q7 that came with the Fortin remote starter, I believe its a legacy version that you used to sell. Board Front: FAR 2006 XH29926. Is it possible to find a manual for this? I'm having a hard time figuring out what the remote starting sequence is?

Idle mode take over no longer working? 2019 Subaru Ascent PTS

Wed, 20 Sep 2023 09:55:38 +0000

I have a 2019 Subaru Ascent push to start. I installed the Evo One with the plug and play harness. everything was working fine...

I could activate idle mode by:

While vehicle is running, Activate Remote Start...Lights flash...Push the PTS Button once, orange light on PTS button would come on then off... get out and lock the doors...

Then Idle mode take over:

I would come back to the vehicle... unlock the doors... push the PTS button once, orange light would come on then off... press the brake pedal and then be able to go without shutdown)

I don't know what happened, but out of no where I can no longer do the take over after initiating idle mode.... when i press the PTS button nothing happens... no light comes on then off.... and when I press the brake the car shuts down....

I have tried reprogramming the module.... ive tried re adding the key to the module... same outcome. I am able to take over after a normal remote start... but not when I activate idle mode....

Evo one no longer recognizes antenna after bypass programming

Tue, 18 Apr 2023 17:22:50 +0000

Was having an issue where the car would not lock after remote start was performed. After trying to reset some of the settings and reinstalling the rf kit no longer worked. Tried master reset and it started working again but then bypass was unprogrammed so had to reprogram decryptor. After that it stopped working and no longer gives horn honk or light on antenna when trying to go intoprogramming. Lights show it is in programming on the evoone. Rf kit is OL-RF-15-SST. Remote start software is .44 per install guide.

The car does not start

Fri, 14 Apr 2023 03:35:54 +0000

I connected the wires yesterday

But I did not connect the device because it needs to be updated and the Fortin FLASHLINK4 has not arrived yet.

I tried to start the car today but it won't start.

?for the car to start Should the EVO-ONE be connected after connecting the wires

Golf R 2017 access to VESCM

Fri, 24 Feb 2023 17:12:37 +0000

Hello. I tried this and I could not figure out how to get access to the VESCM panel with the connectors. Can someone advise how to do that?

thanks!

2010 VW GTI

Mon, 13 Feb 2023 20:36:17 +0000

Hi guys. I am trying to install an evo all with rfk411. The problem is that the lock and unlock works but the car doesn't start when I let pressed the button for 3 sec, nothing happens. The serial number of my box is: 001A07468752. I didnt try use w/o key cuz the guide said: BETA TESTING! Any ideas? Thanks in advance.

key wrapped over the transponder if not it doesnt works and said key not detected, like that works perfect when I press lock button x3. https://drive.google.com/file/d/1sH1vJEa6-gOl6VNTXIqeryZ-f1t5haYY/view?usp=sharing

guide I am using. https://fortin.ca/download/60741/evo-all_ig_sal_bi_vw_eos-gti-jetta-golf_2006-2009_key_c_60741.pdf

Starter won't start if first start of day?

Wed, 08 Feb 2023 15:48:55 +0000

Remote start will not start if it's the first start of the day, it's like if it tries, but crank is like a notch down before its about to start. But once I started the car with my key, then it will work for the rest of the day. I do not know what type of module it is, bought the car used and came with it. Came from a dealer, and they didn't use it. Sometimes it works, sometimes I need to do what I explained.

brake wire causing no start?

Tue, 24 Jan 2023 12:04:22 +0000

Having issue with starting it lights up, brake lights come on like its going to start but stops without cranking says "brake" on LCD On dash, and evo stays lit with orange light or lights , if i put a stick on the pedal and hold brake pedal down as i try to remote start, it works fine

2014 VW Jetta
FORTIN EVO-ONE W/
VWT1 T HARNESS
DATE 12/2021
s/n 002b04248922
firmware remote start = 1.[26] hardware 7.0
BYPASS = 75.[41]
hardware 4.0
using spare key
loaded suggested options on both with diesel option checked

I talked to 1 of your techs today on the phone about it not starting at brake and he said there may be another black & red wire for the brake but after looking at the factory wire schematic & taking the plug down again and physically looking at it, there is only 1 red & black but there is a {black& violet} & {black & yellow} after the brake switch on the schematic, so im thinking going to one of those? at this point ive tried everything else i know to do.
i watch the lights on the evo as i hit the remote start it goes through all 3 lights then after stays on 2 orange lights or 1 glowing over to look like 2? and still says "brake" on the dash as its trying

brake lights come on as its going through the process of trying to start also

so it looks and acts like its going to but fails, checked every connection with my fluke meter also, everything is wired correctly only wire in question i suppose is the brake
and i dont care about having to press on the brake pedal so if there are wires to connect or cut to just do away with this feature im all for it to get this project done

P.S. I never did get a blue flash after plugging in all the plugs and turning on ignition, just lights turned off so dont know if thats normal and not mentioned in the guide? or if something is still wrong?

thank you!

NO FLASHING BLUE LIGHT AT STAGE 5

Thu, 19 Jan 2023 20:45:29 +0000

2014 VOLKSWAGON JETTA TDI AUTOMATIC TRANS
AFTER REPROGRAMMING EVO ONE 3 TIMES STILL CANT GET THE EVO ONE BLUE LIGHT TO FLASH AFTER TURNING ON IGNITION, BLUE STAYS LIT THEN WHEN IGNITION IS ON LIGHT GOES OUT UNTILL YOU TURN IGNITION BACK OFF THEN BLUE LIGHT COMES BACK ON?

FORTIN EVO-ONE W/
VWT1 T HARNESS
DATE 12/2021
s/n 002b04 248922
firmware remote start = 1.[26] hardware 7.0
BYPASS = 75.[41]
hardware 4.0
loaded suggested options on both with diesel option checked

2104 Honda Accord Remote Start does not work after programming and Installation

Sun, 18 Dec 2022 14:11:17 +0000

I have all the wires in place, have a toggle kill switch, programmed correctly and did the Flashlink Dcryptor. When I attempt to remote start, it does not start. I see a blue led light the controller when I hit lock on my key fob, but that's it.

I have a 2014 Honda Acord Push Start. With the remote start in place, the car still operates as normal.

Ignition turns on but doesn’t start

Mon, 12 Dec 2022 22:50:50 +0000

I installed Crimestopper RS4-G5 in my 2003 Chev Silverado 1500 5.3L auto. I also installed the Fortin EVO-All and flashed it with the Fortin Flash-Link Updater 2. I've triple checked the wiring and triple checked the instructions when I programmed it. You hit the start button, it locks, ignitions turns on and just sits there and that's it. After that the yellow light and red light stays on on the EVO-ALL.
Any help would be appreciated as this has been a long on going project.

evo-gmt1 no red light no start

Mon, 12 Dec 2022 18:25:24 +0000

2011 buick regal evo-gmt1 sn001A07v253955 . Blue light flashes with door lock / unlock . oem remotes. no red light , no start. thar-gm1 rev2 harness. what is the correct wiring diagram ? at the moment brown wire to can sw pin 1. brown with white stripe to green /gray parking lights . cannot get ahold of tech

The Remote Start Will Only Work If The Key Is In The Barrell

Fri, 18 Nov 2022 17:39:40 +0000

It is hit and miss starting this Auto Start remote starter. I took it in to get it looked at and the guy hands me the Fortin Transponder Box (TBGM2) and says I need to buy a whole new Remote Starter for $550. However, now that he took this transponder box out the remote starter will work but only if the key is in the barrell or more so you can see the lights on the dash come on and it try to "click/crank" and if you put in the key or take the key out it will start right away. So is my problem just a new transponder box? The key has a circle with a cross inside .Seems odd that this Remote starter is a complete write off.

2010 VW Tiguan doesn't start.

Mon, 14 Nov 2022 19:19:26 +0000

Hi guys.

Dereck could you check this out for me? All the wiring was correct, the programming was perfect, but when the car tries to start, it says, key not recognized and glitch twice when I try to start. I'm not sure if I'm using the correct diode. By the way, the red black wire (starter) is orange black, I'm not sure if this is the correct one either. The transponder wires, one is blue and the other is red, am I opening the blue, or does it not matter? Might you help me? Thank you very much in advance.

Best regards.

https://drive.google.com/drive/folders/16x-fbU40zovZW_PALHmOfIwePzKDa5r9?usp=sharing

2017 VW Tiguan 2.0L Automatic Push Start. Remote start does not work, red and amber light on.

Wed, 19 Oct 2022 18:29:31 +0000

2017 VW Tiguan 2.0L Automatic Push Start. Finished the install. The vehicle fires up but the remote start does not work. I have a red and amber light on. I used the stand alone setup with the THAR-VW1 and TB-VW. Rechecked all connections and everything looks good.

Hyundai Elantra N 2022 installation valide?

Fri, 07 Oct 2022 20:56:50 +0000

J'aimerai savoir si hyundai elantra N 2022 manuelle avec cluster numerique push to start installation valide? demarreur a distance Evo-one. Si oui de guide # 99621 ok pour l'installation?

Evo one only responds when its in valet mode

Mon, 02 May 2022 15:18:19 +0000

Evo one s/n 002B04108567 programs correctly with 2010 dodge challenger standard key wire to wire oem key fob and blue light flashes after when pressing lock or unlock , yellow light turns on when starting the car. The problem is minutes later the unit appears to end in in valet mode , red light on the side near yellow cut wire is on. When I take the unit out of valet mode , red light turns off but I no longer receive the blue light when locking or unlocking the car with the oem fob. When I attempt to remote start the car 3x lock the eed light turns on then the yellow light turns on but the car doesn't crank at all and only attempts to try 1x even though programming is set for 2x attempts. Then I get 4 clicks or flashes from the module. I followed guide #94481 for installation and have tried the basic bear options with my flash link 2 updater on 59.02 and 74 38 and 1 25 firmwares. I notice to anytime I try to run the module on the FL updater the FL updater has to be updated each and every time with 4 05 ? Any help appreciated , no oem alarm

Wait Time

Thu, 07 Apr 2022 08:18:49 +0000

I've checked the status on my order and for three days it has beebn "Charged". How long before it gets shipped/sent?

Accnt #: 50134; Sales Order #: 66321. Thank You.

completed the Cryptor the key bypass, but it will not remote start the car

Mon, 14 Mar 2022 13:49:00 +0000

I completed the Cryptor key bypass on my 2015 Accord and connected all the wires back, I tried to remote start the car, but it doesn't do anything. What can be done?

How can i change the timing on my Fortin when my vehicle starts so my diesel preheat finish cycling?

Fri, 04 Mar 2022 20:06:53 +0000

Start timing

Evo start 2 no service after switching from iPhone to Samsung s21

Tue, 22 Feb 2022 21:18:00 +0000

Customer switched from iPhone to Samsung S21 And now cannot login and it says the service is Unfortunately not available, it should be up shortly

evo all with toy 13 harness and evo start 2

2020 rav 4 push start

Programming or wiring?

Mon, 17 Jan 2022 14:19:25 +0000

A random shop installed this mobile start 3 years ago and ive had issues on and off with mobile connectivity for the past year(of course shop disappeared).

06 BMW 330xi manual transmission, with push start

Just installed a new receiver to update the old one that is no longer supported. Mycar brand of mobile starter.

Prior to installing the new receiver the car would function normally minus the mobile start would not connect. Changed the receiver out to the new 4g module and now car is connected to the app and all the functions work except for remote start. Car needs to be put into "ready mode". Go to manually start the car and it will not crank. If the program button on the evo-one controller was bumped, will that disable any of the starting functions? If this module needs to be programmed, could it block the clutch sensor and stop the car from starting? I didnt see any wires fall off and the "depress clutch" symbol popped up once on the dash.

Looking for a spot to start diagnosising the no start issue.

Key Fob and Cluster

Wed, 01 Dec 2021 00:52:24 +0000

2007 A4. The key fob and instrument cluster was not original. So the immo cause the vehicle not start (cranks only). Can anyone recommend which one to purchase to defeat or bypass the immobilizer to get the vehicle to start?

EVO-ALL THAR-NIS1 Nissan Sentra 2015 Push-To-Start doesn't start

Sun, 28 Nov 2021 18:34:20 +0000

The steps I followed:

- Plugged the 4 pin back of push to start button

- Plugged the 4 pin break pedal

- Plugged the 16 pin OBDII

After plugging those connectors I went with the key bypass programming procedure.

Pushing the lock key 3 times makes the module send commands to the car, but no success turning it on. And then the red light flashes a few times (if I'm not mistaking it's 3 times).

I did not connect those 5 other wires into the BCM, Driver kick panel or Push-To-Start Button because I thought that only connecting the plugs would be enough to get the vehicle started. Is this assumption right or I should connect all those other 5 wires to get the car started?

The following file is the installation guide so you guys can take a look and help me on it:

https://fortin.ca/download/74261/evo-all_ig_tsa_bi_nis1-sentra_pts_2013-2018_a_74261.pdf

Remote start

Sun, 21 Nov 2021 22:34:20 +0000

Question 2013 Ford Explore remote start sets of panic alarm not ever time what could cause this?

decipher qas completed and vech still wont statr

Fri, 19 Nov 2021 15:18:50 +0000

ceicpher was completed amd passed reinstalled evo and prceeded to finsh set up step 4 test the system perform lock Unlock lock did not see the blue light com on alternates yellow /red lights what am I doing warong some help needed

2007 highlander hybrid key bypass programming

Thu, 28 Oct 2021 18:35:06 +0000

I've followed the programming instructions and press and hold the programing button, plugged in the wiring and then let go of the programming button when it gets to RED, but it's stuck on RED and never starts blinking 10 times to start the programming. I've tried this both on my EVO ALL and EVO ONE with the same results. I've double check all my connections and metered between them to make sure the connection is good.

Remote start takeover for 2021 Toyota RAV4 non-hybrid with smart key?

Sun, 24 Oct 2021 11:32:56 +0000

I want to verify the remote start options for the 2021 Toyota RAV4 (non-hybrid, with smart key, and without factory remote start) DOES HAVE the takeover capability? In other words, does your remote start systems keep the vehicle running when the door is opened after being remote started? Toyota's with the factory remote start have a ridiculous feature where the vehicle shuts off when a door is opened after being remote started. I am looking for a remote start system that does not shut the vehicle off when a door is opened after being remote started?

Evo one with ftx64w 2way kits. Hyundai elantra 2009

Sat, 25 Sep 2021 22:01:10 +0000

Mine will crank and start only if oem key mounted. If not mounted will crank but won't start. Please help Thanks

2018 Mazda CX-5 evo one Thar Maz3 windows dont automatic go up or down

Sat, 04 Sep 2021 18:00:01 +0000

I installed EVO ONE with Thar One Maz3 harness in 2018 Mazda CX-5. Before install my windows would go up and down automaticly Just hit the button and let go. Now after install I have to hold the button until they are either up or down. How do i fix this?

Evo One won't start after 5 min or so but was working right after key bypass programming procedure

Thu, 25 Mar 2021 20:31:33 +0000

Hi, I'm kind of lost here, nobody seem to have the answer to my problem, not even Fortin when I call them for help. I installed my Evo One on my Hyundai Tucson 2020 standart key start, followed exactly all the wiring as per the guide, double check all my connection (EMS, CAN BUS, ignition wires, etc) and there's no loose cable. After that I did the key bypass programming procedure with EMS cable : hold down program button while plugging the 6 pin heavy gauge wire till it was red, plug all the others wires, press 7 times program button till it flash 6 times every second, put the key in and turn to ON. At this point the red led flashed 10 time quickly and after stayed on while the blue light started flashing quickly too. After that I turned Ignition to OFF and every light turn off. Right after that I tried to start the car by pressing LOCK, UNLOCK, LOCK and the car started no problem. I then stop the car, close the door and wait...

5 min later, I tried to restart the car with the remote starter but it didn't work. The car got the lock unlock lock signal but no light is flashing on the module anymore like if it went into sleep mode or something.

I tried many thing and here is what I found out :

- If I unplug all cable from the Evo One and plug it straight back it then start receiving signal again for the next 5 min or so.

- If I open the trunk and close it back, the module seem to start back receiving signal from oem remote.

To me it feel like there is a cut off or something that stop the module from receiving any signal from the oem remote after a certain amount of time, kind if it was to prevent from draining the battery of the car.

Could also be that the Evo One is loosing the key programming after current shutting off in the car but then it shouldn't start by just unplugging and replugging the 6 pin ignition wires.

*Sorry if my english is not perfect, I usually speak french.

2019 Honda Passport Elite Installing EVO-ONE

Mon, 22 Feb 2021 11:57:53 +0000

Hello,

Customer has 2019 Honda Passport Elite with OEM remote start thu the OEM remote/keyfob. Honda does not have or support the cellphone App to remote start the car. Customer wants me to install an aftermarket remote start with telematics so they can remote start the car with their cellphone. Is there something I need to do with the OEM remote start module before installing the EVO-ONE? Are there any instruction on how to make the EVO-ONE work with the OEM module or do I just remove the OEM module?

Thansk

2020 Sienna crank no start

Mon, 22 Feb 2021 11:21:02 +0000

2020 Sienna will crank but won't start. Tried different moduals and different fobs. Still no start

09 altima evo-all w/thar-nis1 tharness. Wanted to add siren and shock sensor need wiring diag.

Sun, 21 Feb 2021 20:54:05 +0000

Evo,all w/thar-nis1 t harness, oem remote, standalone. Green wires are for lock n unlock. Where is siren wire ?

no remote start

Thu, 18 Feb 2021 16:18:05 +0000

2006 ford freestyle. I have 2 keys. Hard wired in. The bcm i think is wrong for wire colors. it looks like the wires are in the blue connector and the - disarm is a light blue wire. could not find the light blue with black tracer. For disarm. plug in module goes to red let up insert first key to run position for 3 seconds. led lights on module turn red and yellow turn off remove key insert second key red light flashes 1 time remove key press and hold red light flashes 1 time let up on button .press fob lock 3x and no led flashing 10x. Any ideas would be great I have the lastes firm ware and udates in.

Is RFK912 available for FlashLogic FLRSCH4?

Tue, 16 Feb 2021 02:16:56 +0000

I want to install RFK912 on Chrysler vehicles. Can it be used with the installed FlashLogic FLRSCH4?

3 X Lock engine start on 2001 lexus ES300

Mon, 25 Jan 2021 07:19:54 +0000

Working on a 2001 Lexus ES300 and using guide #58481. Is there an updated version of the software which will support the 3 x lock to start the car without using an additional fortin remote kit?

Thanks.

evo one pairé avec evo start2,parking flash sans arret en sequence de 3 flash.

Sat, 16 Jan 2021 17:36:56 +0000

apres avoir esseyer de programmer evo start2 avec evo one,les parking flash 3 fois en sequance continue et evo start2 blink 7 fois (pit stop). que doive faire merci,

No remote start after install, no parking lights, brake lights light up.

Sat, 02 Jan 2021 14:42:33 +0000

Evo-ALL. 2012 Nissan Maxima

I have all wires connected. Do i need to connect any of the red plugs? No other options installed. I get no parking lights or car does not start when remote is pressed 3x. The horn beeps and the brake lights light up. Car will start when im inside and press brakes but no remote start.