Questions & Answers - Questions récentes tagguées trailblazer

Everything appears to be installed correctly, but it will not try to start.

Tue, 28 Dec 2021 16:57:37 +0000

2006 Chevy Trailblazer LS with Crimestopper RS4-G5 and EVO-ALL. Firmware is 70.18. Used connection 3 and Program 3 from the manual. Could not find where to get firmware 4.06 that every reference I find in support says is required. Guide #3309 Shows Firmware 70.18 is required and Firmware 70.21 is Minimum.

When I press start, I hear clicks from the Crimestopper. Then the door locks trigger and nothing happens. If I insert the key and turn it to on, it will try to start. If I then turn the key to start, it will start. When I then turn the key to off, it continues to run until I step on the break.

The door locks will both lock and unlock as expected.

If I remove the Fortin and press start, the Crimestopper cranks the engine, but it obviously doesn't start as there is no bypass.

Why does the yellow LED not turn off at end of programming?

Tue, 14 Dec 2021 10:09:26 +0000

2006 Chevy Trailblazer LS with Crimestopper RS4-G5 and EVO-ALL. Everything goes just perfectly with the install until the final step. The yellow LED is on Solid just as the install manual says. I turn the key off and the yellow LED does not turn off. The remote start will send the signal to start, but it never tries to start. If I then use the key to turn it on, it will run and continue running after I have turned it off and removed the key. Firmware is 70.18. Used connection 3 and Program 3 from the manual. Could not find where to get firmware 4.06 that the manual says is required. Guide #3309

SERVICE 4 WHEEL DRIVE COMES ON, ON REMOTE START,CAR WONT START WITG KEY

Mon, 03 Dec 2018 18:40:40 +0000

Int-sl+ with cool start Rs4-G5

06 Chevy TrailBlazer LS How To Wire Door Unlock And Lock. And Start Issue.

Sun, 15 Apr 2018 00:56:45 +0000

I'm installing an Evo One with the RFkit in an 2006 Chevy Trailblazer. I cant find any information on where to connect the (-) purple lock and unlock wires. And if I need to use relays. Also the unit starts, shut down and immediatly try to restart at a longer cranking time, but never catch and stay running. On Bypass I have options A1-A11 and C1 ON everything else is OFF. On the Starter options 2.1, 1, 4.1, 6.1 and rest Off, 7.1, 8.1, 9.1, 10.1, 11.1 Off 11.4, 12.1, 13.2, 14.1, 15.1, 16.5, 18.1, 19.1, 20.2, 21.1, 24.1, Off 25., 26.1, 29.1, 30.1, 31.1, 32.1, 33.1, 34.1, 35.1, 36.2, 37.1, 38.1 Off, 39.1.