Questions & Answers - Questions récentes tagguées viper-4105v

2007 Infiniti G35 Sedan EVO ALL with VIPER 4105V

Tue, 13 Oct 2015 20:18:31 +0000

I installed the EVO ALL with T-Harness on my 2007 Infiniti G35 Sedan PTS along with a Viper 4105V remote start. I made ALL connections and was able to program the EVO according to the Guide 12651 (I used the data/D2D cable to connect the two components). When complete, the car would not start. When remote start button is pressed, the ACC will come on, if I press the button again, the IGN will come on, press it one more time and the IGN will turn off. I'm not sure if this is an issue of the components not being compatible, if there is an issue with the EVO or an issue with the Viper. Is there a remote start or RF kit that is guaranteed to work in my car with the EVO ALL?

2011 Hyundai Veracruz Limited Wiring Diagram wrong for 26 pin grey connector at BCM.

Sun, 29 Dec 2013 10:41:40 +0000

Your wiring diagram shows a grey 26 pin connector lower connector with Red (CAN HIGH1) and blue (CAN LOW1). The grey connector on the BCM on my car has orange for pin 1 and blue for pin 2 and only partially matches the picture for the rest of the grey connector.

If connected properly should the fortin show flashing red and blue lights simultaneously after the 10 red flashes as directed in the program1 section or should it alternate?

Richard

Ground while running with Viper Remote Start 4105V.

Thu, 26 Dec 2013 23:06:11 +0000

I don't see any reference to this on the 4105V wiring diagram.

VW Touareg door locks dont function with smart key when remote started

Wed, 18 Dec 2013 18:05:20 +0000

im using a evo all with a viper with a 4105v and the smart key does not function when the vehicle is remote started. what is causing this and is there a way to fix it? I used the wiring info on guide #5541. Thanks