Questions & Answers - Soyez le premier à répondre !

Does the Evo All have the ability to close that hatch on my 2014 audi sq5.

Tue, 21 Jul 2026 17:35:20 +0000

Does the evo module have the capabiltiy to close then rear hatch after it is opens from the driver door switch.

Q50 not remote starting

Mon, 06 Jul 2026 04:12:34 +0000

i have a 2015 infiniti Q50

SN-002B04 759527

i installed the evo-one with thar-nis4 t harness and RF942 kit.

programmed, decrypted and reinstalled tested with oem keyfob worked great, than i programmed the 2 RF remotes, test again worked good 3 times then just stopped working. i can still unlock/lock with all 3 fobs. it will try to remote start, gets to where it should crank and nothing.

I need my flash link reset.

Sat, 23 May 2026 01:29:06 +0000

My Evo all. Keeps going to red on the last step. When programming is. My Evo's supposed to be in. Bypass connection mode or remote starter connection mode.

Module locking itself

Sat, 18 Apr 2026 09:38:38 +0000

I installed this evo all in my corolla with the TOY13 T harness back in 2022, and it worked flawlessly until maybe a year ago. The first odd issue was that it randomly started itself twice one day without me ever pressing the RF remote or activating it with the OEM remote. It didn't do that again after so I didn't think much of it. Then this year I found that my car was unlocked with the trunk open. After that instance I removed the starter and made sure to isolate all the wires that weren't used on the harness (Although this gave me no issues after 3 years), and I even did a master reset and reprogrammed it to the car. After maybe a month I noticed that the car would now start to randomly lock itself (again without me pressing anything on the remotes), and this has been the happening more frequently now. This is very odd and frustrating as the module was working perfectly for 3 years.

how do i get my data for ecryptor

Sun, 05 Apr 2026 20:15:14 +0000

how do i get my key data

Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001461

Fri, 03 Apr 2026 18:25:40 +0000

Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001461. It is evo one.

Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001462

Fri, 03 Apr 2026 18:19:26 +0000

Can you reset my unit…. I can’t flash it anymore. Unit sn: 002B08 001461. It us evo-one.

My Evo All in my 2021 corolla is unlocking/locking itself

Fri, 03 Apr 2026 16:20:07 +0000

Firmware for 2010 Rav4

Tue, 17 Mar 2026 00:21:45 +0000

Can you help me flash older firmware on my Evo-All? For example, from 79/56 to 79/65 ? S/N 001A08005655

OLD FIRMWARE

Mon, 16 Mar 2026 19:56:41 +0000

001A08005612

001A08005652

I am sending the S/N of the modules, that I could not program on the Rav4

No pictures or guides after inputting activation code.

Sun, 15 Mar 2026 23:15:53 +0000

I have a 21 promaster city discovered i have an activation code from my evo one purchase. I try to access the information but whenever I input the cos and click continue I get an orange bar saying the information is locked and to use an activation code or subscription.

Dcryptor limit reached for this vehicle. Reset help?

Sat, 14 Mar 2026 19:17:54 +0000

I have an EVO-ALL and I am trying to setup my CarLINK ASCL7 on my 2019 Toyota Camry PTS to work with it and I've had to change some settings and swapping around the wiring harness. That still doesn't work but the Dcryptor limit has been reached for this vehicle. I need help resetting it.

Service # 001A07 662583

Also if anyone knows the correct flash manager settings and wiring harness setup that would be extremely helpful.

I can't get my Flash link mobile to detect my EVO-One

Sat, 14 Mar 2026 05:12:34 +0000

I can't get my Mobile Flash Updater to detect my EVO-One my s/n is dated 10/2025 SN: 002B04 743797

I have 2025 Toyota Corolla Cross XLE AWD Push to Start

is it ok to tap the low beam wire instead of parking lights?

Tue, 24 Feb 2026 12:32:07 +0000

Hey, I've got a 2015 Mazda 6. Right now my remote starter is hooked to the parking lights at the stalk. Can I just swap that over to the low beam wire instead so the headlights come on when I start it? Anything I should watch out for?

Turn on the Idel mode

Mon, 23 Feb 2026 02:30:43 +0000

When I press the lock button three times while the car is running, the third button unlocks the door instead of locking it, even though the idle control system is supposed to lock it. The door remains open, and if I open the door without the remote, it turns off immediately. I want to lock my 2022 Mazda 6 Evo One Maz3.

Evo one in a 2016 jeep trailhawk starts and shuts off only when below -20

Wed, 18 Feb 2026 23:35:12 +0000

Remote start works fine in warmer weather but when it drops below -20 it will remote start then shut off

No start Q50 2016 EVO-NIST4

Wed, 04 Feb 2026 08:38:27 +0000

Hi,

I have Infiniti q50 2016 3.0L

I installed the EVO-NIST4 to use with OEM key fob , the ignition is tuning on but no cranking, then the red LED flashes 3 times,

the SN is 001A07471366

here is the sequences of LEDs during the attempt

OEM key fob locks 3 times

red

red and yellow

yellow

vehicle hazards indicator flashed 7 time

red flashed 3 time

I checked all the connectors

The car locks and unlocks when the blue LED flashes

I didn’t connect the hood pin

reprogramed the module

followed the recommended option by the software but I’m not sure the options I’m selecting are correct for my setup

I’m following guide 75841

Any help would be appreciated

Doesn't works after changing option

Fri, 30 Jan 2026 00:18:37 +0000

I was able to program with difficulties but it worked until I went and changed one option. After that, flashed, changed options, updated and downgraded firmware, programmed and decrypted and it doesn't remote start. Rav4 2025 hybrid push to start.

Blue light keeps flashing step 6

Thu, 29 Jan 2026 21:45:19 +0000

Step 6, turning off the ignition but the blue light keeps flashing. Doesn't turn off or switch to red and yellow alternating. Rav4 2025 hybrid push to start.

le tiguan 2018 ne demarre pas, la cle valet entourée de fils ne semble pas fonctionner

Sun, 25 Jan 2026 22:42:37 +0000

Quand on actionne le demarreur, on peut voir sur le tableau de bord qu'il ne voit pas de clé. il essaie 2 fois et barre les portes. les lumieres du vehicule flash 1 fois. J'ai 10 tours de fils autours de la cle valet.

Merci de m'aider

GSM module

Tue, 13 Jan 2026 10:21:39 +0000

What brand of GSM or LTE module can I connect to the Fortin Evo-One to work on international networks?

Mazda cx-30

Sun, 11 Jan 2026 10:33:07 +0000

Hello.I live in Armenia and do we have a 4g 5g network.I have an evo-one connected to my 2022 Mazda cx30.Can i connect your LTE module to the Fortine evo-one? can i install a SIM card from our operator on your LTE module? Will it be possible to remotely start the engine from my phone?

Flash Mobile App

Sat, 10 Jan 2026 13:42:46 +0000

Hello, there is a problem with the Flash Mobile application, which after the update on the Play Store, is special for Google, two remote playback devices are not associated with the OBD and I know that I tried on the older version of the application and it was working at the end of my speech.

This is not a question, it's a bug report.

Sun, 04 Jan 2026 00:38:10 +0000

I installed Evo-All + RF411 on INFINITY QX50.

1. Wire color on OBD connector is different : pin 16 +12v - its YELLOW, pin 8 Ign - its White. Unfortunately, I didn't take a photo.

2. After installation, I programmed the bypass and everything worked. LOCK-LOCK-LOCK - and car start.

But after I programmed the RF411 remotes, the car wouldn't start either with the RF411 remote or with the OEM LOCK_LOCK_LOCK remote. There was a transmission error that it was not in park. I reprogrammed the bypass and everything worked.

DSM 550 issue?

Fri, 02 Jan 2026 05:28:22 +0000

Im getting a 702 error communicating back to app. It will start,unlock,lock fine but doesn't communicate back to phone that any of the functions were successful. it is started.

Evo start 2

Tue, 30 Dec 2025 13:50:01 +0000

Bonjour

Depuis plusieurs semaines, je n'ai plus aucune réponse (que vraiment très rarement c'est ok) de mon evo start 2. L'auto reçois bien les commandes mais l'application ne recois pas les informations de retour que ce sois pour la réponse de retour de commande ou pour actualiser l'état. Ma conjointe elle n'a aucun problème. Désinstaller l'application et la réinstaller ne change rien. Je viens de changer ma batterie de l'auto car je la savais faible mais toujours rien. Il y a t'il un moyen de reset l'antenne evo start 2 ou le compte qui est peu être en problème?

Merci

password

Tue, 30 Dec 2025 05:15:49 +0000

Hello. Lately, I've been constantly asking for a password in FlashLink Manager...Why?

RS-232 data link capabilities and documentation for EVO-ONE

Sun, 28 Dec 2025 18:16:29 +0000

I have a technical question regarding the RS-232 data link functionality of the EVO-ONE device.

In the product description, EVO-ONE is specified as having:
“2 × 2-way datalink ports for data-to-data (RS-232) communication with compatible external devices such as smartphones and GPS telematic units.”

Could you please clarify the following points:

Is it possible to connect custom / third-party devices to these RS-232 ports, or are they limited to officially supported external devices only?
Is there any publicly available technical documentation or protocol specification describing the RS-232 interface (message format, baud rates, supported commands, etc.)?
Can EVO-ONE operate as both a master and a slave on the RS-232 interface?
Is it possible to read or modify EVO-ONE parameters via RS-232, or is the interface strictly read-only / data-forwarding?
If configuration access via RS-232 is restricted, is this functionality available under NDA or partner programs?

I would appreciate any guidance on the supported use cases and the availability of documentation.

2013 Audi Q5 Evo-All installation with THAR-AUD1 harness. Module S/N 001A07709290. I can't get past step 10.

Sat, 27 Dec 2025 14:40:10 +0000

DCryptor is greyed out and it won't let me select it. What can I do to get this working

I went through all the programming, still no start. what is the problem?

Fri, 26 Dec 2025 00:30:09 +0000

2020 Silverado 1500 LT standard key.

Vice # 001A07 549816

Also, I have reached a limit on downloads, how do I get more?

Mazda3 2020 cannot unlock doors after remote start

Wed, 17 Dec 2025 18:48:51 +0000

I have a Mazda3 2020 with push-to-start. Installed is an EVO-ALL and I have a modified key with a Fortin RM9MA. Up until recently, if I remote started the vehicle, I could then use my OEM or RM9MA key to unlock the doors. Now, once the vehicle is remote started, I cannot unlock the doors with either remote. The lights flash, and the gas cover locks/unlocks, but the doors remain locked.

Sometimes, if I turn off the vehicle using the key, I can then unlock the doors, but most of the time they still stay locked. I have had to use the emergency physical key to gain access to the car on multiple occasions. Please advise on troubleshooting steps.

Sent start request thru App - Said it started, it did not... almost killed battery

Sun, 14 Dec 2025 19:58:50 +0000

The app has worked both hot and cold for the last 6 months no issues.

I replaced my 12v battery as it had been 5 years on Friday. I drove good distances afterwards, and I also remote started more than once since then.

This morning I remote started thru app, it said vehicle started, but it never showed the headlights etc come on. I've been using the app to monitor voltage (because I knew my 12v was weak this winter before I replaced it) - So I noticed I started at 12.6. After issuing remote start I dropped quickly to 12.2, then got the alert in the app of 11.7. By the time I got to the car it was 11.1. The car was NOT running, just ignition was on.

I hit the brake. Then pressed the brake and started manually and everything is working normally now.

Any ideas on what caused this?

In addition - I accidently left my trunk open last week - the car app never alerted me (though I just found and saw that there is a setting for that).

2021 Toyota Rav4 PRIME w/T-Harness install LTE-ONE.

Thanks

Subaru Legacy OEM Remote Delay

Thu, 11 Dec 2025 01:49:32 +0000

2015 Subaru Legacy std key SUB1 harness installation. EVO-ONE. Using OEM remotes for starting (lock-unlock-lock). Car starts as expected and everything related to the start is working as expected. The only issue I’m having is with the OEM remote response once the vehicle is running. When the car is off, remote responses (lock, unlock, trunk) are quick and immediate. Once the car has been remotely started this changes. The command still work, but take multiple button clicks and responses seem random. I’ve been unable to figure out how to correct this. Any help would be appreciated.

Comfort Seat Adjustment & Parking Break Error

Fri, 07 Nov 2025 19:55:27 +0000

Evo One & MyCar installed and working properly. Looking to confirm a couple of entry items after remote start.

1. On entry, pressing the start button once sometimes will have the following error message displayed, "Parking Support Brake Malfunction - Visit your dealer". This doesn't seem to show up when starting the truck normally. Can there be connection between the remote start and this error or is it just coincidence?

2. My seat goes back automatically when exiting the vehicle and then returns to my position when I normally enter and start the truck. When remote start is activated, the seat doesn't return to my position regardless if I hit the start button a few times. It will reset if I turn off the truck and re-start naturally. Is this feature supported or did I miss something on the programming? Should I just disable this feature?

Thanks

Thought I would update my own post in case anyone else has a similar question. Never did get this to work automatically but when entering the the truck, I hit the push start once and then the brake. The screen cycles off and on like it's being started. I then push the seat memory button to move it into my position.

If I do not push the brake pedal, things like the seat memory, wipers (it think) and probably other things do not work yet. Kind of like the vehicle is not in an ignition state until I hit the brake pedal.

Hope this helps.

Evo-one has been restored.

Mon, 13 Oct 2025 12:01:19 +0000

I opened my problematic Evo-One to check for any broken parts. I laid it on the table, connected the power supply, and... the bottom red LED was lit. I couldn't see it in daylight. I simulated opening the ignition and pressed the service button three times... And, already, yesterday I installed it on the car that arrived.

Please reset Dcryptor limit

Thu, 02 Oct 2025 01:01:01 +0000

Can you please reset my device S/N 002B04 656401. I reached my Dcryptor limit while trying to reprogram.

2020 Honda Civic Starts But No Power to Head Unit and SRS Airbag Error

Wed, 01 Oct 2025 19:52:29 +0000

Installed an Evo-One with Evo-Start on a manual transmission 2020 Civic Sport. Can start the car just fine with the OEM remote or the app but when using either there is no power to the head unit and there is also an SRS airbag alert. This all resets after restarting the car but I am wondering how to keep this from happening. After doing some research i believe ignition 2 powers these accessories, is that so? Checked that function 2 is set to mode one which is supposed to be correct for this vehicle I have double checked all connections and all are good. Have used a multimeter and both ignition pins with pink and white wire and both are receiving 12 volts when started. Also is there a way to fully takeover the vehicle without shutting it down first or is that just a Honda thing with no workaround? Thanks

2019 Honda Accord Sport Manual Trans - NO START

Thu, 25 Sep 2025 00:36:12 +0000

Hi,

I installed a EVO ONE Kit with RF912 remotes. I tested all connections via multimeter from BCM to Fortin harness. I programmed the remotes, and was able to use DECRYPTER. I am able to get the car in manual ready mode. Parking lights come on and car shuts down upon door closing. Upon calling for remote start, the dashboard lights up, displays "Smart Entry System Problem" (yes I know that is normal for these cars). The parking lights sometimes flash twice other times there is no flash and it just does nothing. The Evo one flashes Blue/Red, then Yellow/Red, the off and repeat for another cycle. No crank.

I have reflashed, disabled A11, no change. I have also attempted to sit in the car holding the clutch down incase the clutch bypass was not working but that did not seem to do anything at all.

Please let me know next steps and what else I should try.

DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR (NEED HELP TO RESET THE LIMIT)

Sat, 16 Aug 2025 21:00:02 +0000

DCRYPTOR'S LIMIT HAS BEEN REACHED FOR THIS CAR (NEED HELP TO RESET THE LIMIT)

Sn: 001A07597527

Why won't Flashlink manager let me flash after selecting the features of my car?

Mon, 07 Jul 2025 15:36:32 +0000

After getting my evo-one reseted, I continued to reinstall remote start, however after clicking my vehicle preferences on flashlink manager it does not allow me to flash, its like it loads a little bit and then crashes and continues to guide me back onto the same screen. Any advice?

RESET MOUDD

Sun, 15 Jun 2025 01:11:15 +0000

DCRYPTOR"S LIMIT HAS BEEN REACHED FOR THIS CAR, I SHOULD HOW TO DO

How to lock car in operating mode

Tue, 25 Mar 2025 20:21:27 +0000

How to add this feature to land cruiser 250 (prado) 2025: The possibility of locking the car in operating mode by original car remote control. (Exit the car while it’s running and lock the doors by the original remote)

Letter of gratitude

Mon, 10 Mar 2025 01:28:19 +0000

derek g thank you very much for your work and help, I got everything working. Your last tip helped. The tricks are under the hood, I missed that moment. Thank you.

When you can't find the brake pedal wire

Mon, 03 Mar 2025 14:19:16 +0000

https://youtu.be/m2uq6IW07dg

LED's just cycle thru the three colors, dose not stop when button is released. EVOALL

Mon, 24 Feb 2025 16:19:50 +0000

LED's keep cycling after letting go of the button.

EVO-ALL 10/2024

sn: 001A07 663936

'Mazda 3 2015' in the Flash Manager, but the image displayed was of a 2nd-gen Mazda 3

Tue, 18 Feb 2025 01:43:17 +0000

"When I was planning to flash the EVO-One, I selected 'Mazda 3 2015' in the Flash Manager, but the image displayed was of a 2nd-gen Mazda 3. My car is a 3rd-gen 2015 model. Just wanted to confirm if this is just a visual mismatch or if I should select a different option to ensure proper compatibility."

Evo-one & Evo-start LTE

Thu, 13 Feb 2025 21:53:10 +0000

Hello can you please kindly help me.

I have Evo-one & Evo-Start LTE installed on 2022 Toyota corolla push start last summer everything worked perfect with auto door lock & relock when i walk away, 3 days ago i try to set bluetooth PKE setting signal sensitivity on Evo-start LTE now door lock work away doesn't work any more, also look at option 9 in remote start for active or passive arming and try but no luck.

do i need to do master reset and start over again ?

Thank you very much and have a great day.

Evo all/gmt4 module not connected/detected in flash manager

Thu, 13 Feb 2025 09:23:42 +0000

Evo all/gmt4 module not connected/detected in flash manager 4. It will recognize the flashlink2, i can upgrade the firmware, but the evoall/gmt4 unit is never recognized. I have a solid red light on the flash updater and a solid red light on the evo all in bypass mode, switch to remote start and the evo all has all the leds blinking a few times and it doesnt connect. when I shut down the program and restart it, the program recogognizes the updater plugged in but there is no firmware selected.

Update the firmware again and it accepts, and then every thing is the same as above. it seems like everything is communicating with the evoall flashing, but can never get unit connected throught the software. Is the module bad, servers down, bad flash tool? I tried a reset on the module again but same as above.

Fortin evo-all flashes parking lights 3 times and not started

Wed, 05 Feb 2025 15:14:55 +0000

I released the button on red. Pressed the button once. Turned on the ignition. Red blinked 10 times and blue started blinking. Turned off the ignition. Then released it on blue and after turning on the ignition blue started blinking (as expected). Pressed on the remote 3 times (blue reacts). Red turned on and after 10 seconds red blinked 3 times and nothing else.

Unable to locate purple/yellow wire for key sense in Thar 4

Mon, 13 Jan 2025 14:25:41 +0000

EVO ALL standalone, guide 94891 for 2014 F150 instructions shows purple/yellow wire (assume A16) in THar-For4 harness to be connected to yellow (A1) for key sense. Able to locate yellow pigtail(A1) but not purple/yellow pigtail in harness. I assume that the key sense connection is required to allow key programming to proceed since programming has failed. This harness was purchased in 2018, are there different variations of the Thar-for4 harness?

Thanks,