Where else to tap for power

Question

I'm wounding if there is somewhere else to tap for power and ground.

Could I use a add on fuse tap?

Answer 1

Hello,

What is the year, make, model and trim of the vehicle in question?

What are you installing in the vehicle?

Best regards

Comments

2015 infiniti Q50 base and im installing a evo-one with a thar-nis4 t-harness.

I was wounder if it was 100% need to tap the 15 pin white connector for 12v power and ground.

Could I use something like a posi-tap or run a fuse tap and a ground chassis?

---

You dont have to go there if you dont want, you could also go to pin 16 of the OBD-II connector for 12v and pin 4 of the OBD-II connector for ground.

Fortin does not recommend using t-taps for any connections, simple military splice is best.

You can use an inline fuse holder on the 12v if you wish, must be fused at 7.5A.

Best regards

---

Would it be okay to use a obd II splitter and tap in to that?

---

Yeah that would be fine as long as the module has a solid 12v and ground and the 12v is fused at 7.5A max.